AGED 189 COURSE SYLLABUS

This course is a virtual course meeting asynchronously and synchronously.

Semester Fall 2020 Program/Department
California State University, Fresno
Animals Sciences and Agricultural Education
Course Name
ASCI 1- Introduction to Animal Science
Instructor Name
Mrs. Jesse Bower
Units 3 Office Location
Agricultural Sciences 232
Time MoWeFr 2:00AM - 2:50AM E-Mail jessebower@csufresno.edu
Location Agricultural Building Room 226 Telephone Department Office (559) 278-2971
Zoom Link:
Register in advance for this meeting:
https://fresnostate.zoom.us/meeting/register/tJIkfumsrz0pH9
2huVr2z_eYTttI7mzQZvlp
After registering, you will receive a confirmation email
containing information about joining the meeting.
Office/Consultation Hours
Monday and Wednesday
9:30 a.m.-11a.m.
1:00 p.m.- 2:00 p.m.

Health Screening: Students who come to campus for face-to-face classes will be required to complete a daily health screening which will include temperature checks. If you have experienced COVID-19 symptoms and/or have tested positive within the past 10 days; or if you have had close contact (less than 6 feet for longer than 15 minutes while unmasked) with a suspected or confirmed COVID-19 patient within the past 14 days; you are not allowed to come to campus. Please complete the campus online reporting form. A campus official will reply to provide guidance and information.

Safety Measures: Consistent with the Governor’s order and updated state public-health guidelines, face masks or cloth face coverings are required to be worn in public spaces on-campus and during in-person classes to reduce possible exposure to COVID-19 and prevent the spread of the virus. Physical distancing must be practiced by maintaining 6 feet of distance between individuals. Good hygiene of hand washing for a minimum of 20 seconds or using hand sanitizer is required. Please avoid touching your face with unclean hands. Disposable face masks will be provided to anyone who arrives to campus without one.

Please see university website for the most updated information:
www.fresnostate.edu/coronavirus

As part of your participation in virtual/online instruction, please remember that the same student conduct rules that are used for in-person classroom instruction also apply for virtual/online classrooms. Students are prohibited from any unauthorized recording, dissemination, or publication of any academic presentation, including any online classroom instruction, for any commercial purpose. In addition, students may not record or use virtual/online instruction in any manner that would violate copyright law. Students are to use all online/virtual instruction exclusively for the educational purpose of the online class in which the instruction is being provided. Students may not re-record any online recordings or post any online recordings on any other format (e.g. , electronic, video, social media, audio recording, web page, internet, hard paper copy, etc.) for any purpose without the explicit written permission of the faculty member providing the instruction. Exceptions for disability-related accommodations will be addressed by Student Disability Services working in conjunction with the student and faculty member.

Course description: Strategies for organizing, teaching, and administering educational programs in agricultural mechanics for youth and adults.

It is usually expected that students will spend approximately 2 hours of study time outside of class for every one hour in class. Since this is a 3unit class, you should expect to study an average of 6 hours outside of class each week.

Prerequisites for the course: MEAG 1S; junior/senior standing.

Text:
Planning, Organizing and Teaching Agricultural Mechanics, Bear & Hoerner.

Required Material:
Use of Internet
Use of LockDown Browser (will not work on a Chromebook)
Use of Canvas
Use of Zoom

COURSE SPECIFICS

Student Learning Outcomes and Objectives:

The students will:

  1. Become familiar with ag mech program standards (TPE 3.1, 3.3)
  2. Understand safety instruction for all standards (TPE 3.1, 6.5)
  3. Understand the importance of Ag Mechanics Shop cleanup (TPE 2.1, 2.2, 2.3, 2.6)
  4. Prepare shop design and layout drawings (TPE 1.3, 1.5, 1.7, 6.1)
  5. Develop equipment list including specifications relative to program standards (TPE 1.3, 1.5, 2.3, 2.5)
  6. Develop hand and portable tool list with specifications (TPE 1.3, 2.5)
  7. Design hand and portable tool equipment storage and marking plan (TPE 1.3, 1.5)
  8. Develop tool and supply lists for various program standards (TPE 1.3, 2,5)
  9. Develop an understanding of projects and materials that will enable students to create a bill of materials for common classroom projects (TPE 1.3, 2.5)
  10. Prepare project designs and project grading rubric (TPE 4.3, 5.1, 5.2, 5.5)
  11. Be able to solve project construction problems such as efficient use of materials, materials selection, etc. (TPE 4.7,
  12. Present two- 20-minute lessons

TOPIC, SCOPE AND SEQUENCE

Course requirements/assignments and Grading policy:

Classroom Exercises 20%
Quiz/Exam 15%
Lesson Plan Presentation #1 25%
Lesson Plan Presentation #2 25 %
Term Assignment 10%
Attendance 5%
Total 100%

Classroom Exercises

Classroom exercises will be modified from the chapters in the text Planning, Organizing and Teaching Agricultural Mechanics, Bear & Hoerner. These will be assigned and submitted through Canvas.

Quiz/Exam

Quizzes will be given on Friday for each respective chapter(s) covered that week. Quizzes will be given through Canvas using LockDown Browser and Webcam. There will be no make-up quizzes allowed. You must attend class on the day of the quiz to obtain the quiz password.

Exams will cover all materials covered in lecture, assigned as text readings, handouts given on handouts, assigned as outside readings, or included as part of assignments. Questions may be in any format from multiple choice, true-false, matching and fill in the blank to essay type questions. Points may be deducted from examinations, at the instructors’ discretion, for illegible handwriting, spelling errors and/or sentence structure that are hard to understand. It is expected that all written work, on exams or assignments, will include complete sentences or clearly identified lists as appropriate for the examination or assignment. Examination dates are shown in the tentative course schedule but are subject to change.

Exams may be made up only if the student: 1) has a justifiable excuse for missing the exam 2) informs the instructor prior to the exam that he/she cannot take the exam, and 3) makes up the exam before the graded exams are returned to the class. Late assignments may be penalized at the instructor’s discretion. Guidelines in APM 232 will be followed, refer to http://www.fresnostate.edu/mapp/documents/apm/232.pdf for more information on justifiable reasons and university policy on late exams and assignments.

Lesson Plan Presentation #1 and Lesson Plan Presentation #2

All required assignments associated to the Lesson Plan Presentations will be submitted through Canvas. Classroom Presentations will take place through Zoom. Due dates can be found through Canvas.

  • Practice Recording
  • Lesson Plan Peer Review
  • Lesson Plan Final Submission After Peer Review
  • Lesson Plan Class Presentation
  • Lesson Plan Participation
  • Lesson Plan Presentation Peer Feedback

Term Assignment

  • Curriculum Outline
    • Using the California Curriculum Advanced Cluster for Agricultural Mechanics (Links to an external site.) outline the curriculum you would use for a mechanics class.
    • A minimum of seventy five percent of your topics must come from the advanced cluster.
    • Designate the units to be taught and the lesson topics. Estimate the time you intend to allocate for each unit.
    • Your outline should cover one academic year/180 days
  • Shop Design
    • Draw an Ag Shop Facility in which you could teach the curriculum you have outlined.
    • The shop must meet the minimum square footage requirements outlined in the Blue Print for Excellence and your text.
    • Specify location of equipment.
    • Specify location of hand tool storage.
    • On an overlay show an electrical detail and plumbing detail.
    • On another overlay show all exhaust control systems and fire or safety equipment.
    • Show bathrooms.
    • Include material storage areas also.
    • Supplemental resources and be found starting on page 85 of your text.
  • Lesson Plans
    • Select from your course outline one unit and write daily lesson plans for each day of that unit. You must write lesson plans for the whole unit, four minimum. Use the Direct Instruction Lesson Plan template provided.
  • Materials, Tools, Equipment and Budget
  • Clean-Up System
    • Design and illustrate a system of shop clean-up which fits your new shop facility.
  • Tool Storage
    • Design and illustrate a system for inventory, check out, and accounting for tools.

Attendance

Attendance will be taken the first 2 minutes of class. If you are late to class, or you sign off Zoom early, you will not be counted for attendance that day.

Grading Scale

A= 92%
B= 82%
C= 72%
D= 62%

Assignment and Examination Schedule

See the course calendar in the syllabus, and/or refer to Canvas for all assignment and exam dates. All dates are subject to change.

COURSE POLICIES & SAFETY ISSUES

There will be no talking in class unless you are called on by the instructor, the use of cell phones during class for reasons there than those associated with the class, is prohibited, unless you have permission from the instructor. You are required to have your video on when calling into class through Zoom.

If you are absent from class, it is your responsibility to check on announcements made while you were away. Attendance is worth 5% of your total grade. If you are not present when class begins, and stay until class is dismissed, you will receive an “absent” mark for that day. Showing up late to class will result in an absent.

“The classroom is a special environment in which students and faculty come together to promote learning and growth. It is essential to this learning environment that respect for the rights of others seeking to learn, respect for the professionalism of the instructor, and the general goals of academic freedom are maintained….Differences of viewpoint or concerns should be expressed in terms which are supportive of the learning process, compassion, to share of themselves without losing their identities, and to develop and understanding of the community in which they live….Student conduct which disrupts the learning process shall not be tolerated and may lead to disciplinary action and/or removal from class.”

Late work and make-up work policy

Arrangements must be made PRIOR to the evaluation if for any reason you are unable to be present at the scheduled time. If you miss an evaluation due to an unexpected medical illness or emergency, you must leave a message on the professor’s answering machine before the scheduled evaluation time, email the professor, and then provide (medical) documentation at or before the next class. If you do not leave a phone message on the professor’s answering machine, and email the professor, you will receive 0 points for the missed evaluation. All papers are to be submitted at the start of class, the day they are due unless otherwise stated by the professor. If the student will not be present at class the day that an assignment is due, it is the student’s responsibility to submit it before the due date. Assignments will be accepted one day past the due date. However, these assignments will be subject to an automatic deduction of 10%. Late assignments beyond one day are not accepted.

Plagiarism Detection:

Student work will be used for plagiarism detection and for no other purpose. The student may indicate in writing to the instructor that he/she refuses to participate in the plagiarism detection process, in which case the instructor can use other electronic means to verify the originality of their work. Turnitin Originality Reports WILL NOT be available for your viewing.

Zoom:

Zoom sessions will typically be recorded and posted on Canvas.

Best Practices while in a Class

  • Sign in to the Zoom desktop client and stay signed in.
  • Check your internet speed.
  • Turn your camera on and have your camera at eye level.
  • Stay muted unless you're talking to reduce background noise.
  • Make sure you sit in a well-lit and quiet place.
  • Be mindful of what's going on behind you. Think about having solid wall behind you or turning on the virtual background.
  • Clothing is NOT optional.
  • Raise your hand and wait to be called upon.
    • If you wish to speak, either physically raise your hand or use the "Raise Hand" button at the center of the bottom of your screen. Once the teacher calls on you, unmute yourself and begin speaking. When you have finished speaking, indicate you are done by saying something like "That's all" or "Thank you" and then mute your microphone again.
  • If you don't have anything nice to say...
    • The Zoom chat feature is a tool to make comments and ask questions without interrupting the speaker but be aware that your comments are public and are recorded in the minutes of the session. As you most likely learned in your first face-to-face classroom back in kindergarten, "If you don't have anything nice to say, don't say anything at all."

Chair's name: Dr. Randy Perry
Department name: Animal Sciences and Agricultural Education

Chair's email: randyp@csufresno.edu
Department phone number: 559.278.2971

UNIVERSITY POLICIES

Students with Disabilities: Upon identifying themselves to the instructor and the university, students with disabilities will receive reasonable accommodation for learning and evaluation. For more information, contact Services to Students with Disabilities in the Henry Madden Library, Room 1202 (278-2811).

The following University polices can be found at:

  • Adding and Dropping Classes
  • Cheating and Plagiarism
  • Computers
  • Copyright Policy
  • Disruptive Classroom Behavior
  • Honor Code
  • Students with Disabilities
  • Title IX

UNIVERSITY SERVICES

The following University services can be found at:

  • Associated Students, Inc.
  • Dream Success Center
  • Learning Center Information
  • Student Health and Counseling Center
  • Writing Center

INTELLECTUAL PROPERTY PROVISION

As part of your participation in virtual/online instruction, please remember that the same student conduct rules that are used for in-person classrooms instruction also apply for virtual/online classrooms. Students are prohibited from any unauthorized recording, dissemination, or publication of any academic presentation, including any online classroom instruction, for any commercial purpose. In addition, students may not record or use virtual/online instruction in any manner that would violate copyright law. Students are to use all online/virtual instruction exclusively for the educational purpose of the online class in which the instruction is being provided. Students may not re-record any online recordings or post any online recordings on any other format (e.g., electronic, video, social media, audio recording, web page, internet, hard paper copy, etc.) for any purpose without the explicit written permission of the faculty member providing the instruction. Exceptions for disability-related accommodations will be addressed by Services for Students with Disabilities (SSD) working in conjunction with the student and faculty member.

THIS SYLLABUS AND SCHEDULE ARE SUBJECT TO CHANGE IN THE EVENT OF EXTENUATING CIRCUMSTANCES.

Course Calendar

Tentative Course Calendar

Fall 2020
(Monday/Wednesday/Friday)

Date Topic Assignment Student Presentations
1 Wed., Aug 19 First Day of Class    
2 Fri., Aug 21      
3 Mon., Aug 24 Lesson Planning Chapter 1- Planning by the Educator
Chapter 2- Preparation by the Educator
 
4 Wed., Aug 26 Lesson Planning    
5 Fri., Aug 28 Lesson Planning Quiz  
6 Mon., Aug 31   Chapter 3- References for Agricultural Mechanics
Chapter 4- Instructional Program for Agricultural Mechanics
 
7 Wed., Sept 2      
8 Fri., Sept 4   Quiz  
Mon., Sept 7 HOLIDAY – Labor Day    
9 Wed., Sept 9   Chapter 5- Program Scheduling and Student Management  
10 Fri., Sept 11   Quiz  
11 Mon., Sept 14   Chapter 6- Personal Safety Protection  
12 Wed., Sept 16      
13 Fri., Sept 18   Quiz  
14 Mon., Sept 21   Chapter 7- Safety in the Vocational Agricultural Department 1 and 2
15 Wed., Sept 23     3 and 4
16 Fri., Sept 25   Quiz 5 and 6
17 Mon., Sept 28   Chapter 8- Responsibility and Reliability 7 and 8
18 Wed., Sept 30     9 and 10
19 Fri., Oct 2   Quiz 11 and 12
20 Mon., Oct 5   Chapter 9- Instructional Safety Program 13 and 14
21 Wed., Oct 7     15 and 16
22 Fri., Oct 9   Quiz 17 and 18
23 Mon., Oct 12   Chapter 10- Planning for Buildings and Facilities 19 and 20
24 Wed., Oct 14     21 and 22
25 Fri., Oct 16   Quiz 23 and 24
26 Mon., Oct 19   Chapter 11- Environmental Control  
27 Wed., Oct 21      
28 Fri., Oct 23   Quiz  
29 Mon., Oct 26   Chapter 12- Tools and Equipment  
30 Wed., Oct 28      
31 Fri., Oct 30   Quiz  
32 Mon., Nov 2   Chapter 13- Inventorying, Ordering, and Storing Supplies  
33 Wed., Nov 4     1 and 2
34 Fri., Nov 6   Quiz 3 and 4
35 Mon., Nov 9   Chapter 14- Project Promotion in Agricultural Mechanics 5 and 6
Wed., Nov 11 HOLIDAY – Veterans Day    
36 Fri., Nov 13   Quiz 7 and 8
37 Mon., Nov 16   Chapter 15- Computers and Agricultural Mechanics 9 and 10
38 Wed., Nov 18     11 and 12
39 Fri., Nov 20   Quiz 13 and 14
40 Mon., Nov 23     15 and 16
Wed., Nov 25 Thanksgiving Break    
Fri., Nov 27 Thanksgiving Break    
41 Mon., Nov 30     17 and 18
42 Wed., Dec 2     19 and 20
43 Fri., Dec 4     21 and 22
44 Mon., Dec 7     23 and 24
45 Wed., Dec 9 Last Day of Class    
Finals week Days Dates  

Final Exam in this course

Date Topic Assignment Student Presentations
Final Exam Preparation & Faculty Consultation Days: Thursday and Friday Dec 10 – 11  
Final Semester Examinations Monday – Thursday Dec 14 – 17  
Final Exam in this course Monday Dec 14 11:00A-01:00P  
# Last Name First Name
1 Armendariz Sophia
2 Barrett Morgan
3 Bronken Spencer
4 Buchnoff Caileigh
5 Cozzitorto Dominique Caroline
6 Estrada Maribel
7 Gaylord Sandra
8 Hernandez Alexus
9 Hill Chris
10 Johnson–Lusk Helena
11 Marlin Nohelle
12 Martinez Graciela
13 Meier Brittany Jo Nicole
14 Ortiz Sam
15 Parham Mitchell Thomas
16 Pimentel Rachel
17 Powers Maren
18 Rodriguez Kelly
19 Sheehan Clayton
20 Silva Morgan
21 Smith Kayla
22 Snell Aimee
23 Valladares Renteria Sigi
24    

Download the PDF

This HTML version was generated with AI assistance and may contain errors or omissions. The original approved PDF remains the official document of record. An alternative accessible format is available upon request from the document creator in accordance with Title II of the ADA.